Advantages & Disadvantages of Composite Fiber Heating Wire ?
 
Composite fiber is Nano-Fiber, different people has call it’s different names , such as heating wire is also called heating line, electric heating wire and other names. Composite fiber heating wire is still the same, this is a new type of material,current market is more extensive, mainly used in, electric clothing, electric shawls, electric gloves, electric socks, electric underwear and other wearable products .
 
Advantages :
1,Feel better, because the line very thin, more often that even do not need insulation layer, so the hand feels comfortable .

2,Strong bending resistance, not afraid of folding, standard point, can easily bend 25,000 times will not lead to fracture, actually the fact of the test far exceeds this data .

3,Not afraid of washing, this aspect is mainly for the efficacy of wearable products, its own unique toughness, can be easily applied in the washing machine, water resistance 50 times + .

4,Anti-aging ability is strong, in the process of production, after many anti-oxidation treatment, even if the surface does not do insulation treatment, still can be used for a few years is not a problem . Of course, the performance of the insulated composite fiber will be better, the service life is usually more than 6 years !

5,Unique far infrared, some people say that only Graphene has infrared, this is a bit misleading consumers, as of now, the most mature technology, still is carbon fiber material, followed by composite fiber . Carbon fiber infrared wave short is 8-15uM, composite fiber is 7-14uM .

6,High temperature resistance of Composite fiber and Carbon fiber, have high temperature resistance, usually the material itself more than 1850 ° C, even if the insulation layer is added, high temperature resistance can reach 200 ° C, so it can be used with confidence .

7,The failure rate, due to the superiority of the composite fiber's own performance, it’s own failure rate is almost zero, most of the failures occur from the process of processing, such as, terminal processing, heating wire fixing, etc .

8,High thermal efficiency, the thermal efficiency of composite fiber, and carbon fiber is almost the same . Have reached an amazing 99.99%, much higher than other materials, perhaps you will say, difficult to Graphene thermal efficiency is not good, certainly positive answer you, is not good . First evaluate the thermal efficiency of a material is good and bad, not according to unilateral data, after testing . The heating sheet made of Graphite material, when the temperature exceeds 60 degrees, it is difficult to have room for improvement, at this time even if the current and power are increased, his thermal conversion coefficient will be greatly reduced, the same size, voltage, power products, within 60 ° C, graphite products heating fast, above 60 ° C, composite fibers and carbon fibers heating better, higher temperature .

9,Power attenuation, any material, has its own physical characteristics, composite fiber is a negative coefficient . Such as 7.4V-10W products, after heating, the power will become 9.5W, this is thermal attenuation, not permanent attenuation, is the physical characteristics of the material, the material after cooling, and recovery, carbon fiber is a positive coefficient, For example, 7.4V-10W products, after heating, the power will become 10.5W, and if the material is good enough,10 years later, his power will not be less than 10W, The decay of graphite products is directly related to the selection of substrate, some are made of conductive paint, some are made of conductive ink, some are conductive film, etc., no matter what kind of material is made, it can not avoid the end of his permanent attenuation, the power will be used less and less, can not be recovered, generally only suitable for fast selling products, or gifts !

Disadvantages

10,if you talk about the disadvantage, the biggest drawback may be that the material is a little expensive, the smaller the resistance, the more expensive the cost accounting . But this expensive need depending on the kind of material to make a comparison, carbon fiber and general alloy wire to make a comparison, is more expensive . Graphite material, it is cheaper, but I think, you naturally have expensive reason, too cheap, may not let people use Rest assured !

                                It is impolite to reprint and reproduce without the author's consent .